Driving Directions to Redington Beach
From our Cleveland St shop, Redington Beach is about 13-15 miles and a 20-25 minute drive: south on US-19 to Park Boulevard, west through Seminole, then across the Tom Stuart Causeway onto Gulf Boulevard in Redington Beach.
Landmarks Nearby
- Town Park (Gulf Blvd & 164th Ave)
- Friendship Park (across from Town Hall)
- Moon Park beachside at 157th Ave
- Causeway Park at the 161st Ave causeway
1205 Cleveland St, Clearwater, FL 33755
(727) 558-4636
Available 24/7 for emergencies
Residential & Commercial Electrician in Redington Beach, FL — Whole-House Rewiring, Panel Upgrades, Surge Protection, Generator Installation & 24/7 Emergency Electrical Repair
Redington Beach is a small residential beach town in the 33708 ZIP, stretching just a few blocks between the Gulf of Mexico and the Intracoastal Waterway. The town covers barely half a square mile, but every property sits within a few hundred feet of salt water on at least one side. That proximity creates electrical maintenance demands that inland homeowners rarely encounter.
Most homes in Redington Beach date from the 1950s through 1970s. Original wiring in these properties — often a mix of cloth-insulated copper and early aluminum — is well past its expected service life. Add decades of salt-air corrosion to aging insulation and outdated panels, and these systems carry real safety risks. Clearwater Electric specializes in bringing these older waterfront homes up to current code with full rewiring, panel replacements, and corrosion-resistant hardware throughout.
We also serve the newer construction and renovation projects along the waterfront. Whether you're adding a second-story addition, installing an EV charger in your carport, or upgrading to a whole-house generator for hurricane season, our licensed team handles the work from permit to final inspection. Redington Beach is about 15 minutes from our Clearwater office, so we respond quickly — including 24/7 emergency calls.
Redington Beach Electrical Work Done Right
Corrosion-resistant installations for every waterfront property. Free phone estimates — call now.
Call (727) 558-4636What We See Most Often in Redington Beach
Homes along Gulf Boulevard and the numbered avenues were mostly built in the 1950s through 1970s, and original wiring — often a mix of cloth-insulated copper and early aluminum — is well past its expected service life even before salt-air corrosion is factored in.
We bring these older waterfront homes up to current code with full rewiring and panel replacements, using corrosion-resistant hardware throughout instead of standard parts.
Every property in Redington Beach sits within a few hundred feet of salt water on at least one side, which corrodes outdoor outlets, weatherheads, and breaker contacts far faster than the same components would fail a few miles inland.
We install marine-grade exterior lighting fixtures and outlets using stainless steel, powder-coated aluminum, and sealed LED housings designed specifically for waterfront exposure.
Aluminum branch wiring, common in homes built here in the late 1960s and early 1970s, is a known fire hazard that many owners aren't aware is still active in their walls until an inspection or renovation uncovers it.
We perform complete copper rewiring or install approved aluminum-to-copper pigtail connections depending on scope and budget, and we pair that work with whole-house generators for hurricane season.
Redington Beach Areas We Cover
How We Handle Every Redington Beach Job
You Call, We Ask the Build Era
Most Redington Beach homes date to the 1950s-1970s — tell us roughly when yours was built so we come prepared for cloth wiring or aluminum branch circuits.
On-Site Assessment
A licensed electrician inspects the actual panel and wiring at your address, checking for aluminum branch wiring and salt-corroded outdoor connections specifically.
Written Estimate
You get a clear price before work starts, whether that's a full rewire, a panel replacement, or a targeted repair.
Licensed, Code-Compliant Work
Every job meets current NEC and Florida code, with permits pulled and inspections handled for older-home upgrades.
Walkthrough & Warranty
We test everything, walk you through what was done, and stand behind the work after we leave.
What You Get With Clearwater Electric
1950s-1970s Rewiring Expertise
Most Redington Beach homes are decades old — we know what original cloth-insulated and aluminum wiring looks like and how to bring it up to current code.
Aluminum Wiring Replacement
Homes built here in the late 1960s and early 1970s often have aluminum branch wiring — we handle full copper rewiring or approved pigtail connections depending on budget.
Marine-Grade Fixtures as Standard
Every property in this small town sits within a few hundred feet of salt water on at least one side, so corrosion-resistant hardware is standard on every job.
Short Causeway, Fast Response
Redington Beach is a compact, half-square-mile town — our crews reach any address here quickly once we're across the Tom Stuart Causeway.
Residential & Commercial Electrical Services for Redington Beach Homes and Businesses
- Complete rewiring for 1950s-1970s beach homes
- 200-amp panel upgrades replacing outdated fuse boxes
- Corrosion-resistant outdoor outlets, fixtures, and weatherheads
- Surge protection against Gulf lightning strikes
- Generator installation for hurricane preparedness
- Ceiling fan wiring and lighting upgrades
- 24/7 emergency response for waterfront properties
Redington Beach Electrical FAQ
Redington Beach homes in the 33708 ZIP face corroded outdoor outlets, degraded weatherheads, and salt-damaged breaker contacts. Many houses along Gulf Boulevard and the numbered avenues were built in the 1950s-1970s with wiring that needs full replacement. We diagnose and fix these issues daily. Call (727) 558-4636 for an assessment.
Yes. Homes built in the late 1960s and early 1970s in Redington Beach often have aluminum branch wiring — a known fire hazard. We perform complete copper rewiring or install approved aluminum-to-copper pigtail connections depending on the scope and budget.
We install marine-grade exterior lighting fixtures rated for coastal environments. Standard fixtures corrode within a year or two this close to the Gulf. We use stainless steel, powder-coated aluminum, and sealed LED housings designed for waterfront exposure.
The whole town — the Gulf Boulevard beachfront strip, the Intracoastal-side streets east of Gulf Blvd, the blocks around Town Park and Friendship Park near Town Hall, and the numbered avenues near Causeway Park at 161st Ave. Redington Beach is barely half a square mile, so we cover it all.
Your Redington Beach Electrician
Licensed and insured. We know waterfront wiring — from vintage beach cottages to modern Gulf-front builds.
Call (727) 558-4636