Lighting Installation by a Residential Electrician in Clearwater, FL
Recessed lights, outdoor fixtures, under-cabinet LEDs, landscape lighting, and chandelier mounting. We wire it, install it, and put it on a dimmer so you control the mood and the electric bill.
Clearwater Electric installs residential lighting throughout Clearwater and Pinellas County — indoor and outdoor, decorative and functional. Our licensed electricians handle recessed lighting, under-cabinet LEDs, landscape and pathway lights, chandeliers, bathroom vanity fixtures, motion-sensor lights, and full LED retrofits. Call (727) 558-4636 to schedule your installation.
Why Lighting Matters More in Florida
Clearwater gets more than 240 days of sunshine a year. That sounds like you would never need to think about lighting. The opposite is true.
Florida's intense sunlight creates harsh glare through east- and west-facing windows. Hurricane-impact glass — which most Clearwater homes now have — comes with a tint that dims the natural light entering the house. And because the sun sets before 6 p.m. for half the year, evenings arrive early. Homes that rely on a single overhead dome light per room feel dim, flat, and dated.
Good residential lighting in Clearwater means layering — ambient light from recessed fixtures, task lighting under kitchen cabinets and over bathroom vanities, accent lighting to add depth, and outdoor lighting that does not corrode in the salt air within three years. It is functional, not decorative. And it takes an electrician who understands both wiring and how Florida light behaves.
What We Install Inside Your Home
Recessed Lighting
6-inch and 4-inch IC-rated housings with LED trims in every color temperature from warm white to daylight. We handle new-construction and retrofit installations in both flat and vaulted ceilings. Kitchens, living rooms, hallways, and closets — recessed lights work in every room and clean up the ceiling line.
Under-Cabinet LED Lighting
Hardwired LED strip lights or puck lights under kitchen and bathroom cabinets. No plug-in transformers cluttering the counter, no visible wiring. We conceal the power supply inside the cabinet and connect everything to a dedicated switch or dimmer.
Chandelier & Pendant Mounting
Heavy fixture mounting with properly rated boxes, reinforced ceiling supports, and the right gauge wire for the load. We install everything from simple kitchen island pendants to full-size foyer chandeliers. If the existing box is not rated for the weight, we replace it before hanging anything.
Bathroom Vanity Lighting
Vanity bars, sconces, and overhead fixtures wired to code in wet and damp locations. Florida code requires specific fixture ratings in bathrooms depending on proximity to the shower and tub. We know which ratings apply where and install accordingly.
Planning a Kitchen or Bathroom Remodel?
Lighting is the last thing people think about and the first thing they notice. Call us before the drywall goes up.
Call (727) 558-4636Exterior and Landscape Lighting Built for Florida
Outdoor lighting in Clearwater takes a beating. UV radiation fades finishes. Salt air corrodes cheap metals. Tropical storms rip down anything not properly secured. Humidity works its way into unsealed housings and shorts out connections. We install exterior lighting that is built to handle all of it.
- Front entry and porch lights — wall-mounted fixtures on dusk-to-dawn photocells or smart switches for automatic control
- Motion-sensor floodlights — LED security fixtures with adjustable sensitivity and coverage zones, wired to their own circuit
- Landscape and pathway lights — low-voltage LED systems with a transformer connected to an outdoor-rated GFCI circuit
- Pool and patio deck lighting — wet-location-rated fixtures installed to NEC Article 680 requirements for areas near water
- Soffit and eave lighting — recessed or surface-mount fixtures that illuminate walkways without exposed fixtures at ground level
- Garage and carport lighting — high-output LED fixtures with vapor-tight housings for humid, non-conditioned spaces
Your Outdoor Fixtures Corroding Already?
Coastal Clearwater eats cheap lights for breakfast. We install marine-grade fixtures that last.
Call (727) 558-4636How a Lighting Installation Works
Discuss the Layout
Tell us what rooms you want lit and how you use them. A kitchen needs bright, even task lighting. A living room benefits from dimmable ambient light. A backyard needs motion-triggered security fixtures and low-voltage pathway lights. We tailor the layout to how you actually live in the space.
Fixture and Circuit Planning
We determine how many fixtures, what circuit capacity is needed, and whether the existing wiring supports the plan. If we need to run a new circuit from the panel, we tell you upfront. If the existing circuit handles it, we save you that cost.
Installation
We cut the openings, run the wire, mount the fixtures, and connect everything to switches or dimmers. Recessed lighting goes fast — a six-light kitchen layout typically takes half a day. Outdoor landscape systems take a full day to trench, wire, and test.
Test and Adjust
Every fixture gets tested. Dimmers get calibrated to eliminate flicker at low levels. Outdoor photocells and motion sensors get adjusted for the right sensitivity and timing. We do not leave until the lighting looks and works exactly the way you want it.
Projects That Pair Well With Lighting
- Ceiling fan installation — many rooms benefit from both a fan and recessed lights on separate switches
- Dimmer and smart switch upgrades — new lighting deserves controls that match
- Whole-house rewiring — if lighting upgrades reveal old or inadequate wiring behind the walls
- Smart home wiring — lighting scenes, schedules, and voice control for every room
Lighting Questions From Clearwater Homeowners
Recessed lighting typically runs $150 to $250 per light installed, depending on ceiling type and accessibility. A standard six-light kitchen layout usually falls between $900 and $1,500. We include the LED trim, housing, wiring, and a dimmer switch in that price. Call (727) 558-4636 for a specific quote on your project.
Yes. We run new circuits from your panel to wherever you need exterior fixtures — front entry, garage, backyard, pool deck, walkways. All outdoor wiring is installed in weather-rated conduit and connected to GFCI-protected circuits, which is required by Florida code for any outdoor installation.
Clearwater's combination of salt air, UV exposure, humidity, and tropical storms destroys cheap fixtures fast. We install fixtures rated for wet locations with marine-grade hardware, corrosion-resistant housings, and sealed LED drivers. Powder-coated aluminum and bronze finishes last the longest in Pinellas County's coastal climate.
LED bulbs use roughly 75 percent less energy than incandescent and last 25 times longer. In a Clearwater home where lights run frequently due to early sunsets half the year and heavily tinted hurricane-impact windows, the savings compound quickly. A full LED retrofit in a typical home pays for itself in under two years through lower Duke Energy bills.
Yes. We install the junction box, run the wiring, and mount the chandelier — including heavy fixtures that require a fan-rated or chandelier-rated box. If the chandelier weighs more than 50 pounds, we reinforce the ceiling support. We handle everything from wiring to hanging; you just pick the fixture. If you also want a ceiling fan in another room, we can do both in the same visit.
Ready to Transform Your Lighting?
Tell us the room. We will tell you the best layout, the right fixtures, and the exact cost. One call does it.
Call (727) 558-4636